Our Blog

Choosing clear aligners was a great decision on your part! Straight teeth and a healthy bite? Subtle, almost invisible aligners? 3D technology custom-designed just for you? All the positives we’ve come to expect from your choice of orthodontic treatment.

So, don’t sabotage your good work! Here are five negative habits that will prevent you from getting the most out of your aligners:

1. Don’t forget to keep them clean

One of the reasons you chose clear aligners is because they are nearly invisible. But careless cleaning habits can leave them discolored, scratched, or cloudy. Soaking in colored mouthwash can stain aligners. Using abrasive cleaning products or brushing with a heavy hand can cause scratches. And failing to keep aligners clean can lead to a buildup of cloudy plaque. Talk to us! We know all the best products and practices to keep your aligners their most sanitary—and most invisible.

2. Don’t eat with your aligners in place

Aligners are simply not meant to be used while you eat. Chewing puts too much stress and pressure on them, and can lead to aligner damage and even breakage. Because you will be wearing your aligners for most of the day, planning ahead for your meals is key. One bonus: it’s a great way to eliminate unconscious snacking.

3. Don’t let foods or drinks stain your aligners

It’s great that you take your aligners out to eat, but do you remember to brush before you replace them? Foods like spaghetti sauce and blueberries that stick to your enamel can stain your aligners. And it’s always best to remove your aligners before drinking a beverage. If a drink can stain your teeth, it can stain your aligners. Red wines, dark juices, colas, and, of course, coffee and tea can cause discoloration. Another thing to consider? Food particles in the trays can not only stain your aligners (and your enamel), but keep your teeth in contact with the acids and sugars that lead to cavities.

4. Don’t run hot

Aligners are formed using heat, so it makes sense that heat can de-form them as well. Drinking hot beverages with your aligners in place can change their shape—and even subtle changes will affect your progress. Since warped aligners might have to be replaced, save the piping hot beverages for those times you’re not wearing aligners. It’s best not to clean them with very hot water as well.

5. Don’t forget to wear them

Aligners need to be worn approximately 20-22 hours each day. If you’re not putting in the required time, you’re delaying your progress. If you’re having trouble with scheduling meals or activities, talk to Dr. Randall Welser and Dr. Kirby Marine when you visit our Moline or Geneseo, IL or Clinton, IA office. We have suggestions.

But let’s not just dwell on the negatives. We like to focus on the positive, too, so here’s the one item on your “Do List” that will absolutely make your aligner experience the best it can be:

Do follow our recommendations!

Clean your aligners with the proper tools and products—and clean your teeth and aligners after every meal and snack. Remember that water is the only guaranteed problem-free beverage. Don’t expose aligners to heat or eat with them in place, because they can be warped or damaged. And be sure to wear them as long as you need to each day—this will keep your treatment on track and on schedule.

Enjoying a future filled with beautiful, healthy smiles? That’s not just a positive—it’s a happily-ever-after!

From the time you were small, you’ve been warned about the dangers of plaque. Why? Because:

• It’s an unpleasant film that sticks to your teeth
• It causes cavities
• It causes gum disease
• It can cause extra problems when you wear braces

And really, do we need to know much more than this to motivate us to brush? But if you’re in a curious mood, you might be wondering just how this soft, fuzzy film accomplishes all that damage. Let’s take a closer look at the sticky problem of plaque.

How does plaque form?

We live with hundreds of species of oral bacteria, most of which are harmless, and some of which are actually beneficial. But when our oral ecosystem gets out of balance, problems can occur. For example, without regular and thorough brushing and flossing, we start to build up plaque.

Plaque starts forming within hours of your last brushing. And even though plaque fits the very definition of “seems to appear overnight,” this biofilm is actually a complex microbial community with several different stages of development.

• It starts with saliva.

Saliva is vital to our oral health, because it keeps us hydrated, washes away food particles, neutralizes acids in the mouth, and provides minerals which keep our enamel strong. Saliva also contains proteins, which help form a healthy, protective film on the tooth surface. This film is called a pellicle.

• Bacteria attach to the pellicle.

There are species of oral bacteria that are able to attach themselves to the pellicle film within hours of its formation. As they become more firmly attached, they begin to grow and divide to form colonies, and are known as the early colonizers of the plaque biofilm.

• A complex biofilm forms.

If you’ve skipped brushing for a few days (please don’t!), you’ll notice a fuzzy, sometimes discolored film on your enamel—that’s a thriving plaque community, and it only takes a matter of days to go from invisible to unpleasant.

If you’re not removing plaque regularly, it can harden further and become tartar. And once you have tartar buildup, you’ll need the care of a dental professional to remove it.

• What happens if we ignore plaque and tartar?

We get cavities and gum disease.

How does plaque cause cavities?

• The bacteria in plaque, like all organisms, need nutrients.

Our normal oral environment and the food in our everyday diets provide the nutrients plaque needs. And, as we mentioned above, certain types of oral bacteria convert these nutrients into acids. Foods such as carbohydrates, starches, and sugars are most easily converted into acids, which is why we recommend that you enjoy them in moderation.

• The biofilm promotes acid production.

Within the plaque film, anaerobic bacteria (bacteria which don’t use oxygen) convert sugars and starches into acids. As the plaque film becomes denser, it blocks acid-neutralizing saliva and oxygen from reaching these bacteria close to the tooth’s surface, creating an ideal environment for the bacteria to produce their acid waste products.

• Acids attack enamel.

The sticky nature of plaque keeps these acids in contact with tooth enamel, where, over time, acids dissolve minerals in enamel, weakening the mineral structure of the tooth.

How does plaque cause gum disease?

• Bacteria cause inflammation and gingivitis.

The bacteria in plaque irritate the delicate tissue of the gums, which causes an inflammation response which can leave your gums swollen, red, bleeding, or tender. This early form of gum disease is gingivitis. Fortunately, good dental care and careful brushing and flossing can usually prevent and even eliminate gingivitis.

• Plaque and tartar can lead to periodontitis.

When plaque and tartar build up around and below the gumline, the gums pull away from the teeth, leaving pockets where bacteria collect, leading to infection as well as inflammation. Infections and constant inflammation not only harm gum tissue, they can destroy the bone supporting the teeth. This serious gum condition is periodontitis, and should be treated immediately to avoid further infection and even tooth loss.

How does plaque affect orthodontic patients?

• Plaque collects around your braces.

Braces provide plenty of spots for plaque to hide from your brush. If you aren’t extremely diligent with your brushing and flossing, plaque collects near brackets, wires, and bands—all those spots that a brush and floss find difficult to reach.

• Plaque promotes demineralization

The demineralization process we mentioned above can cause white spots on teeth (decalcification), where minerals have dissolved. Sometimes these spots can be treated, and sometimes they are permanent. They can become quite sensitive, and may lead to cavities.

Careful brushing and flossing around your braces will help eliminate the plaque that can cause demineralization near brackets. Ask Dr. Randall Welser and Dr. Kirby Marine about the tools and the brushing and flossing techniques which will give you the best results.

How do we fight plaque?

From the time you were small, you’ve learned how to fight plaque:

• Brush at least twice a day for two minutes, and be sure to brush all of your tooth surfaces and around the gumline.
• Floss to remove plaque from between the teeth and near the gumline.
• See your dentist as recommended for a thorough professional cleaning.

Be proactive. If you have any questions, talk to us at our Moline or Geneseo, IL or Clinton, IA office about the best way to keep plaque at bay. We can show you the most effective ways to brush and floss, recommend anti-plaque toothpastes and rinses, even suggest plaque-revealing tablets if you’re missing some trouble spots.

We’ve only brushed up on some plaque basics, because there is a lot more to discover about this complex biofilm. Happily, even with all there is to learn about plaque’s growth and development, it’s reassuring to know that getting rid of it is quite simple—with just a soft-bristled brush, some dental floss, and a few minutes of your time each day, you’re on the way to a healthy, happy, plaque-free smile.

We’re all friends here, so if you sometimes feel a bit nervous before your orthodontic appointments, no judging! Ask us about any worries you might have. We are happy to explain procedures, equipment, and your orthodontic options so you know exactly what is going on during treatment. And if X-rays are a concern, we can put your mind at ease here as well.

What Exactly Are X-rays?

Sometimes patients feel reluctant about the process of imaging because X-rays are a kind of radiation. But the fact is, radiation is all around us. We are exposed to radiation naturally from our soil and water, sun and air, as well as from modern inventions such as cell phones, Wi-Fi, and air travel.

Why is radiation so common? Because matter throughout the universe constantly gives off energy, and the energy that is emitted is called radiation. This radiation takes two forms—as particles (which we don’t need to consider!) and as traveling rays. This second type is known as electromagnetic radiation, created by photons traveling in regular waves at the speed of light.

We are exposed to electromagnetic radiation every day, because, whether we can see them or not, these different wavelengths and frequencies create various forms of light. Radio waves, microwaves, infrared, visible, and ultraviolet light, X-rays, and gamma rays are all part of the electromagnetic light spectrum.

Different types of radiation on this spectrum have different wavelengths and different frequencies, and produce different amounts of energy. Longer wavelengths mean lower frequencies and less energy. Because X-rays have shorter wavelengths and higher frequencies than, for example, radio waves and visible light, they have more energy.

How Do Dental X-rays Work?

An X-ray machine produces a very narrow beam of X-ray photons. This beam passes through the body and captures images of our teeth and jaws on special film or digital sensors inside the mouth (intraoral X-rays), or on film or sensors located outside the mouth (extraoral X-rays). These X-ray images are also known as radiographs.

Why are X-rays able to take pictures inside our bodies? Remember that higher energy we talked about earlier? This energy enables X-rays to pass through the softer, less dense parts of our bodies, which are seen as gray background in a radiograph. But some substances in our bodies absorb X-rays, such as the calcium found in our bones and teeth. This is why they show up as sharp white images in radiographs. 

There are many different types of dental X-rays used in orthodontics, including:

• Occlusal X-rays, which show the entire arch of teeth in the upper or lower jaw.
• Panoramic X-rays, which use a special machine to rotate around the head to create a complete two-dimensional picture of teeth and jaws.
• Cephalometric X-rays, which show the patient’s entire profile, and the position and development of the teeth and jaws.
• Cone Beam Computed Tomography, an external device which uses digital images to create a three-dimensional picture of the teeth and jaws.

Why Do We Need X-rays?

You might have noticed that these X-rays, unlike, for example, typical bitewing X-rays, don’t take images of individual teeth. That is because orthodontists deal with the teeth in relationship to each other and to the structures around them.

Beautifully aligned teeth and a healthy bite are the visible result of your orthodontic work, but there’s a lot going on above and below the surface that needs to be discovered and taken into account before your treatment even begins. X-rays help us evaluate:

• The size, shape, and position of your teeth, including impacted teeth and wisdom teeth
• The size, position, and health of your roots throughout treatment
• The size and shape of your jaw bones, and how they affect your teeth alignment and bite
• Your progress during different phases of treatment

How Do Orthodontists Make Sure Your X-rays Are As Safe As They Can Be?

First of all, the amount of radiation you are exposed to with a dental X-ray is very small. In fact, a typical panoramic X-ray provides roughly the same amount of radiation we are exposed to through our natural surroundings in just one day. Even so, Dr. Randall Welser and Dr. Kirby Marine and our team are committed to making sure patients are exposed to as little radiation as possible.

Radiologists, the physicians who specialize in imaging procedures and diagnoses, recommend that all dentists and doctors follow the safety principal known as ALARA: “As Low As Reasonably Achievable.” This means using the lowest X-ray exposure necessary to achieve precise diagnostic results for all dental and medical patients.

The guidelines recommended for X-rays and other imaging have been designed to make sure all patients have the safest experience possible whenever they visit the dentist or the doctor. We ensure that imaging is safe and effective in a number of ways:

• We take X-rays only when they are necessary.
• We provide protective gear, such as apron shields and thyroid collars, whenever needed.
• We make use of modern X-ray equipment, for both traditional X-rays and digital X-rays, which exposes patients to a lower amount of radiation than ever before.
• When treating children, we set exposure times based on each child’s size and age.

And now that we’ve talked about some things you might like to know,

Please Let Us Know If . . .

• You are changing orthodontists and have had previous orthodontic X-rays taken. Ask to have your older X-rays sent to our office so we have a complete record of your orthodontic history. (With digital X-ray technology, this transfer can be accomplished with e-mail!)
• You’re pregnant, or think you might be pregnant. Even though radiation exposure is very low with dental radiographs, unless there is a dental emergency, dentists and doctors recommend against X-rays for pregnant patients.

X-rays play an important part in helping us make sure your orthodontic treatment provides you with a lifetime of beautiful and healthy smiles. If you have any concerns, contact our Moline or Geneseo, IL or Clinton, IA office. When it comes to making sure you’re comfortable with all of our procedures, including any X-rays that might be necessary, we’re happy to give you all the inside information!

One of the most common reasons for getting braces is because there’s just not enough room for all your teeth to fit next to each other evenly. The result is overlapping and crooked teeth. What’s the first step in creating the space you need? Well, that depends on just how much room you need to align your teeth and bite properly.

When there is going to be a serious need for space, there are orthodontic solutions that can help, including palatal expanders, surgical options, and extractions. But if you only need a tiny bit of room so that regular braces will fit properly, we have a tiny solution—orthodontic spacers!

Why do you need to make space before you get braces? Because Dr. Randall Welser and Dr. Kirby Marine might need to make some room around crowded molars so your braces can be installed properly.

For example, you might need orthodontic bands to anchor your braces. An orthodontic band is a slim, custom-fitted ring of metal which fits snugly around a molar. It is durable, provides a place to attach bands and springs to help correct malocclusions (bite problems), and can securely surround a tooth that might be weak because of a large filling. Spacers can separate crowded teeth just enough to allow a band to be fitted around a molar.

Even if you don’t need bands, sometimes separators are necessary to provide enough space between the teeth for your braces to work effectively. The back teeth tend to move even closer together with braces, and, without adequate space, bite problems, risk of decay, and other difficulties can arise.

And while you might think that some serious equipment is in order to make room between those sturdy molars, the typical spacer, or separator, is actually extremely simple--usually a tiny, round elastic band, often made of rubber. Spacers can be placed between tight teeth in a matter of minutes. Each ring is stretched and positioned between your teeth with a special tool. As it returns to its original shape, the spacer’s width provides just enough pressure on the teeth it touches to make a bit of space between them. And a bit of space is usually all you’ll need.

What do spacers feel like? For some people, they can be uncomfortable. You might feel soreness, some pressure, or as though a piece of food is stuck between your teeth. Ask us for suggestions on making you more comfortable, whether it’s dining on ice cream and cold drinks, eating soft foods, or taking over-the-counter pain relief. Separators are only designed to be in place for a very short period (usually under two weeks), but if they are causing you pain, give us a call.

What do you need to do to help the process along? Actually, it’s more what you need not to do. Don’t use dental picks or floss on your separators, avoid chewing gum, and take chewy and sticky foods off the menu. And don’t be tempted to touch or play with your spacers!

Spacers can create space between the teeth so quickly and efficiently that they often fall out on their own after a few days. If your separators fall out, give our Moline or Geneseo, IL or Clinton, IA office a call. It could mean that you are ready for your braces, and on the way to a lifetime of healthy, beautiful smiles. And it’s a journey that begins with a tiny, springy step.